ข่าว

AWWA C504 vs API 609: Which Standard Should Your Specification Use?

2026-10-30

AWWA C504 and API 609 are both butterfly valve standards, but they answer different questions. AWWA C504 tells an engineer how to build a resilient-seated butterfly valve for municipal waterworks. API 609 tells an engineer how to build a butterfly valve for broad industrial service, including hydrocarbon, chemical, utility, and process applications.

MORE DETAILS

Butterfly Valve Sizing: DN/NPS, PN/Class, Face-to-Face and Bolt Patterns

2026-10-16

A butterfly valve is not interchangeable just because two valves have the same nominal diameter. Four dimension families must match: nominal size, pressure rating, face-to-face length, and flange drilling or bolt pattern. If any one of them is wrong, the valve may not fit between the flanges, may not match the pipe bolts, or may not be rated for the operating pressure.

MORE DETAILS

Butterfly Valve Selection Checklist: 12 Data Points for an Accurate RFQ

2026-10-15

A vague butterfly valve inquiry produces a vague quotation. Most RFQs arrive missing two or three pieces of information that change the valve size, seat material, actuator, testing requirements, or price. The result is a longer quotation cycle, a proposal that may not match the project, or a valve that is ordered for the wrong service.

MORE DETAILS

How to Inspect a Butterfly Valve Before Shipment

2026-09-28

butterfly valve is only as reliable as the condition it leaves the factory in. Even a correctly designed valve can arrive on site with coating damage, a misaligned disc, an incomplete bolt hole pattern, a scratched seat, or an actuator that was never tested with the valve. A structured pre-shipment inspection catches these problems before they become installation delays, leak failures, or warranty claims.

MORE DETAILS

Silicone Butterfly Valve Seat: Applications and Temperature

2026-09-24

The seat is the most critical component of a resilient-seated butterfly valve — it determines sealing performance, chemical compatibility, temperature limits, and overall service life. Among the available elastomer options, silicone rubber (VMQ) occupies a unique position: it offers the widest temperature range of any common valve seat material, combined with excellent food-grade compliance and superior flexibility at low temperatures.

MORE DETAILS

What Is a Groove End Butterfly Valve? Complete Guide | Laux Valve

2026-09-21

Groove end butterfly valves explained: AWWA C606 grooved connection, 300 psi ratings, no-flange installation, fire protection & HVAC applications.

MORE DETAILS

What Is Stop Shoulder Locating for a Vulcanized Seat on a Butterfly Valve?

2026-09-17

A vulcanized seat butterfly valve has its resilient rubber seat cured and bonded directly to the valve body. For the seat to seal correctly over thousands of cycles, it must stay in exactly the right position during molding, assembly, and operation. The stop shoulder, also called a locating shoulder or seat stop, is the machined shoulder inside the body that positions the vulcanized seat, controls how much the seat compresses, and protects it from being over-loaded by the disc.

MORE DETAILS

Metal Seated vs Resilient Seated Butterfly Valve: Which One to Choose

2026-09-07

The seat is the most application-sensitive component in a butterfly valve. It determines how the valve seals, its temperature limit, chemical compatibility, leakage class, operating torque, maintenance interval, and ultimately its total installed cost.

MORE DETAILS